Saturday, November 3, 2012

Pigs In The Oven

We took the kids to Tattered Cover recently and let each of them pick out a book. M and S picked seemingly random books, but C picked a kids' cookbook by Klutz, called Kids Cooking that comes with it's own, color-coded measuring spoons. She was very insistent that, if we buy this book, we must use it for cooking.

I looked through it and I was impressed. I've seen other "kid recipe" compilations that were inexplicably full of ingredients I would otherwise never buy, or instructions they couldn't understand (but could probably do if I explained it to them). On the other end of that spectrum, there are a lot of kids recipes out there that are just too simple. Combine yogurt and fruit. Exciting.

This cookbook has muffins and french toast and from-scratch brownies. It also has a "not to eat" list that includes a dog treat recipe, homemade bubble solution, and play dough. And, as I have come to expect from Klutz, it is written for kids. In fact, it is written TO kids.

My kids aren't quite that confident in their reading skills yet, but if they were, the instructions would be spot on for them to understand. "In a big enough mixing bowl, stir together the flour and the quick oats (or wheat germ) and the sugar, baking powder and salt. Then dig a little hole in the middle of it all.", it says. Of course, that little hole is for adding the liquid ingredients, later. What I love is "big enough". As an adult, I get pretty tired of reading small, medium and large as though that means anything to me. As far as I can tell, all of my mixing bowls are large.

And if you somehow don't understand the instructions, there are plenty of illustrations of white gloves following directions. This must either be the Hamburger Helper guy, or disembodied Mickey Mouse hands.

The first section of the book is "kitchen rules". I love rule #2: "Be Clean. Cooking is a lot of fun, but you won't get to do it very often if you leave a mess behind you. If your recipe makes you wait for something to cook, why not wash some dirty dishes while you wait? Afterwards, clean everything up and put it away. You'll keep your grown-up assistant a lot happier."

Overall, this is an amazing book and I could rave about it for pages. We used it to make pigs in blankets, even though I think every grown-up in America knows how, or would know immediately if they just saw one. The kids were thrilled to use the cookbook and follow the directions, which has it's own value.

DIY Shrinky Dinks


The plastic for this was hard to come by, to be honest. #6 is difficult to recycle in Colorado, so there isn’t really a lot of it. Other people’s blogs were suggesting that you could get it at the salad bar in a grocery store, or the bakery. But, one day as I was waiting on a prescription to be filled, I checked all of the plastic containers in that side of my grocery store and found that only the deli containers with the black bottoms had clear, #6 plastic lids. And I don’t buy fried chicken.

I experimented with this project and learned a few things I’ll share with you at the end.

Things you need:

#6 clear plastic
Permanent markers (colors of your choosing)
Scissors
Hole punch (if you want to make charms)
Parchment paper
Cookie sheet

How we did it:

Acquire plastic - Seriously, this was more complicated than other bloggers made it seem. Maybe it’s because I live in Colorado. Take out doesn’t come in plastic, and grocery store muffins come in #1s. It’s hard to recycle #6 around here, and people care about recycling, so the only things that I could find in #6s were the deli foods I literally never buy (I scouted the store in my free time). So my partner asked the deli guy if we could just have some #6, clear plastic lids “for a science experiment” (with kids in tow). He was clearly a bit confused, but gave up a stack of lids without a fuss. Win.

Preheat your oven - Preheat to 250, now or later. I never preheat first thing because it always takes me longer to prepare than it takes my oven to preheat. Besides, 250 is SO low.

Cut and/or color - First, cut your plastic so that you have a plain, flat piece. Then, depending on what your plan is, either color the plastic or cut it into the shapes you want. I used the plastic to make necklace charms for each of my kids with my phone number and my partner’s, so they are equipped to get help if they ever get lost. For that, I cut out the shapes I wanted, then wrote the information on the plastic. I’ve seen really attractive charms made by letting small children color a whole sheet of plastic, then cutting it into identical shapes.

Tip: Cut the pieces about 6 times the size you want them to end up. Trust me.

Hole punch - Only if you want a charm. This might be a step you want to do after cutting and before coloring, if you’re doing a more planned-out piece like I was. Otherwise, it can be done after.

Tip: When the plastic shrinks, it also thickens, so the holes don’t need to be as far from the edge as you might think. The pieces become quite sturdy.

Bake - Line a cookie sheet with parchment paper. I’m not sure if it would be a problem if you didn’t, but I didn’t want to find out. You can reuse the parchment paper for more shrinks if you want.

I can’t tell you how long to bake them. It’s a quick process (my largest pieces took only a few minutes). It depends on the size of the plastic piece, it seems. Just watch them. They will curl up a lot. You might worry that if two parts of hot plastic touch each other it’ll be ruined. It’s fine. Then, they uncurl. When the pieces are all completely flat again, they’re done. You might want to bake similarly sized pieces together and avoid mixing sizes. I didn’t wait to see what would happen if I left them in longer than they needed.

More Tips: Experiment with this. I learned that they work better if they curl upward instead of down at the edges. For my lids, they always curled in the same direction (toward the top/outside of the lid). They also always seemed to shrink more in one direction than the other. I found that I could see faint striations (lines) in the plastic and that the greatest shrinking happened against the striations. So if you want all of your pieces to come out the same size and shape, cut them the same size and in the same direction on the plastic.

Also, seal them. My kids were playing with their charms and rubbed off part of the marker. I don’t have anything to seal them with just yet, but I’m planning on getting some spray sealer. I hear that works just fine. I’ve also heard clear nail polish works, but check that it is non-acetone before you try.

This project is adapted from RustSunshine with modifications and additional information based on my experience.





Saturday, October 27, 2012

Cleaning Corroded Battery Terminals


My kids recently decided to break out their "amphibious" remote-controlled cars, which they haven't played with in probably 6 months. Of course, as children's toys are basically expected to do, they had leached the batteries dry in the interim. To be clear, they have off switches. I just stopped trying to enforce "turn them off when you're done with them" a long time ago... probably shortly after they got them for Christmas last year.

Anyway, the point is this: 9 new AA batteries all together. And in the process of changing them, I discovered that one (somehow only one) of the battery compartments was encrusted with that lovely white destroyer of metals. Corrosion. Eww.

Instantly, I thought of the time my MP3 player got lost under a huge piece of furniture at my mom's house and was destroyed by that crust by the time I found it. I did not want to have to surrender this toy to effects of material degradation just as the kids found renewed interest in them, so I resolved to fix it if possible.

First, I broke out the rubbing alcohol and cotton swabs. I knew it was safe to use. I've read of others using it to clean metal fixtures in bathrooms and kitchens. Why not battery terminals?

That worked to a certain degree, but there was no way I could get enough scrubbing power in those tiny,  AA compartments to get the rough patches off of the springs and plates. So I did some research and some experimenting. Here's what worked:

Baking soda and water.



Things you need:

  • Baking soda
  • Water
  • Tooth Brush (clean - I used the one I have set aside for stain removal purposes)
  • Cotton Swabs

How we did it:

Remove the batteries - Obviously? How else are you going to access the terminals? I'm not really sure what would happen if you didn't, actually. Just do.

Sprinkle the soda - Sprinkle baking soda on the terminals. This process doesn't require a lot of baking soda. They don't need to be coated, just dusted. And any extra you put in there now is going to be extra for you to get out of there later. A little is enough.

Dampen your brush - dip your tooth brush in water. Here again, you don't want it to be too wet, just damp. I patted mine out on a rag a bit before I used it. You don't want to have so much water in the tooth brush that it puddles in the corners of your battery compartment, just enough to wet the baking soda.

Scrub - Use your damp tooth brush to scrub the baking soda onto the metal surfaces, then to clean the baking soda out of the battery compartment. This should result in clean, shiny, like-new surfaces. If you have trouble getting the baking soda out of the corners or crevasses , a toothpick will help.

Dry - I used cotton swabs to dry any remaining dampness out of the battery compartment. I suppose you could probably blow dry it if you're impatient, or air dry it if you really like waiting. Either way, make sure it's dry before you put new batteries in, for safety purposes.

Tips - This apparently also works for car batteries (and probably batteries of all sizes). If you disconnect the wires from the terminals of a car battery and follow these steps, probably with considerably more zeal, you can clean those as well.


Saturday, October 20, 2012

Caramel Apples


These were quick and easy. They were also quite fun. I want to come up with or find some new, different, maybe even better ways to decorate them next time. This year, though, with 3 kids under 6 years old, this was simple and satisfactory for everyone. Now they want to know when we’re going to eat them. :)

Caramel Apples
Serves 5
Total time 30 minutes
Prep time 30 minutes

Ingredients:

5 apples of your choice
1 package (14 ounces) individually wrapped caramel cubes
2 tbsp milk

Other required items:

Skewers
Cooking spray
Cookie sheet

Optional:

Chocolate chips
Sprinkles
Other decorations

Instructions:

Remove stems and wash apples
Push skewers into centers of apples (one per) through dimple where stem was


Freeze apples on clean cookie sheet while you prepare caramel
Unwrap caramel squares and pile in a bowl
Microwave caramel squares for 2 minutes, stir once halfway through
Stir caramel again, until smooth
Remove apples from freezer
Spray empty cookie sheet with cooking spray
Dip apples one at a time, turning sideways for higher caramel coating 
place on cookie sheet
Return to freezer or place in refrigerator

At this point, you can call it done, or you can decorate. I microwaved some chocolate chips (the same way you microwaved the caramel) and used a spoon to spread chocolate over the top half of the apples 

so the kids could decorate the apples with sprinkles. Freezing the apples before I dipped them in the caramel helped the caramel coat better and puddle less at the bottom, but also made it almost instantly lose its sticky texture, so sprinkles wouldn’t stay.




Falling Leaves Diarama

This one was just for the twins, so we did it while M was napping. It’s a great refrigerator-hanging art piece. We finger painted leaves on the trees, so they had a lot of fun with it.

Things you need:

• Printed Falling Leaves Template (Link will open in new window)
• Construction paper
• Sandwich-size zip-lock baggie
• Hole punch (optional)
• Pencil
• Scissors
• Glue
• Markers, crayons, or paint

How we did it:

Cut or color - You can do either first. I cut out the tree shapes first so I could cut the square and hole punch the “leaves” while they were painting and reduce wait time. You could just go for being prepared with a bowl full of “leaves” before you get started.

Of course, whatever you did first, you do the other one second. We colored the trunks and the ground with markers and finger painted leaves on the tops of the trees. I have to say, I’m pretty impressed with the way they turned out. I used disposable pie pans for paint and color mixing.

Hole punch - Like I said, I did this while the kids were painting. I used red, brown, orange and yellow construction paper (one sheet each) and punched... really a lot of holes in them. I have a 3-hole punch, so I lined up all four sheets of paper and punched once, then slid the paper down a bit and punched again. Just keep doing that until you’re satisfied. If you have a one-hole punch, it will still work, but... I’m sorry.

You will also use the square part of the pattern to cut out a blue square of construction paper at this point. Again, unless you were more prepared than me and already did this.

Put it together - We painted, so I let the trees dry while the kids napped. Then, I put what seemed like a reasonable amount of hole-punched paper in two ziplock bags. I used freezer size because that was all I had. It turned out fine, except freezer bags aren’t quite as transparent as sandwich bags. Zip the bags shut.

Next, I used tape, circled sticky side out, (you can use glue) to put the pieces together. I taped the trees to the front of the bag and the blue squares to the back (only taping where the trees would cover it).

I probably could have let them use the square pattern piece to cut their own blue sky... they probably could even have punched their own leaves. But I imagine they would have gotten bored of that.

Tuesday, October 16, 2012

20 Rules For My Unborn Son

Because I have three girls, and a boy on the way. I'm thankful for the fact that he will have a decent man for a father and role model. But here are some things I, his mother, think seem important about being a boy, a man, and happy. In no particular order, and certainly not a complete list:


1. Never shake a man’s hand sitting down.
2. There are plenty of ways to enter a pool. The stairs ain’t one.
3. The man at the grill is the closest thing we have to a king. Fetch him beers.
4. In a negotiation, never make the first offer.
5. Never cancel dinner plans by text message.
6. Request the late check-out.
7. When entrusted with a secret, keep it.
8. Don’t get married before you can legally drink. (or too soon thereafter, for that matter.)
9. Return a borrowed car with a full tank of gas.
10. Don’t fill up on bread.
11. When shaking hands, grip firmly and look him in the eye.
12. Don’t let a wishbone grow where a backbone should be.
13. If you need music on the beach, you’re missing the point.
14. Carry two handkerchiefs. The one in your back pocket is for you. The one in your breast pocket is for her.
15. You marry the girl, you marry her whole family.
16. Be like a duck. Remain calm on the surface and paddle like hell underneath.
17. Experience the serenity of traveling alone.
18. Never be afraid to ask out the best looking girl in the room.
19. Always do sober what you said you’d do drunk. That will teach you to keep your mouth shut.
20. Don’t show off. Impress.

Saturday, October 13, 2012

Pine-Cone Bird Feeders


I paired this project with talks about why birds benefit from bird feeders, particularly in the fall and winter months. This was super easy. A my five-year-olds could have done the whole thing on their own, but we cut and tied the strings for them anyway. My two-year-old also managed to do everything but cut and tie. The feeders have been up on our balcony and have already been visited by birds, which the kids find exciting.

Things you need:

Pine-cones
Smooth peanut butter
Bird seed mix
Twine
Spoons
Scissors

How we did it:

Tie pine-cones - Do this before you put anything on the pine-cone. You won’t want to stick your fingers in the mess later. Cut the twine to the length you want. If you don’t know where you’ll be hanging it, be liberal with length. Tie one end of the twine around the stem of the pine-cone, below the first row of horizontal spokes. If you tie the twine to the stem, above the horizontal pieces, it could easily slip out.

You can also tie the center of your twine around the pine-cone and tie the ends together if you want a loop to hang.

Butter it up - Provide smooth peanut butter on a plate or in a bowl, and a spoon, to each kid. Explain that they want to thoroughly coat the outer parts of the pine-cone and let them get started. This part is remarkably easy. I thought of using butter knives, but the curve of the spoon seemed to help them get a thicker layer of peanut butter.

Roll it in seed - We used a small cookie sheet with a raised edge as our seed tray. It doesn’t take very much seed, but I can’t tell you exactly how much you’ll need. Pour a pile of seed out and let each kid take their turn rolling their peanut buttered pine-cone in it. This is also incredibly easy.

Hang it up - Think like a squirrel... and try to outsmart yourself. We hung ours from plant hooks on the eve just outside the sliding door to our balcony. This seemed like it might have been a problem, but we used a pretty generous length of twine, so the squirrels can’t reach the pine-cones from the roof, the floor, the rail, or anywhere on the wall. Also, we have two large dogs who love an opportunity to chase a squirrel.

birdfeeders.com (Link will open in new window) says, “Hang your bird feeder away from trees, bushes, fences or buildings. Squirrels and other predators may use these to climb or jump onto the bird feeder. If you must hang the bird feeder on a tree, keep it at least six feet from the trunk or the tree limbs.”